background image

GB 19

Subtitling and Teletext. The TEXT button

Pressing the 

TEXT

 button 

once

 while watching TV will put a

menu on the screen where it is possible to change a subtitled lan-
guage. This is only possible if more than one subtitling language
is transmitted.
Exit the menu by pressing the 

TV

 button.

Video recorder

With a Video Cassette Recorder (VCR) connected you can watch/
record video tapes.
If your VCR is connected with a SCART cable and you press the
Start button on the VCR, the playback will start and interrupt the
TV programme from the Mediamaster.
To watch TV programmes again , press the 

TV

 button or stop the

VCR.

Please note, that during the recording of a programme, 

every-

thing

 shown on the screen will be registered! For example: If you

call up a Menu from the Mediamaster on the screen, the menu
will be recorded!

Analogue Receiver

If you have an Analogue Receiver connected and turn it ON, the
programmes from that receiver will be shown. With the 

TV

 but-

ton on the Mediamaster’s remote control you can toggle between
channels from the analogue receiver and terrestrial TV channels.
The display on the Mediamaster indicates TV during the watch-
ing of terrestrial channels, and SAT during watching of channels
from the analogue receiver.

When the analogue receiver is turned OFF, with the TV button on
the Mediamaster’s remote control you can toggle between chan-
nels from the Mediamaster and terrestrial channels .
In this case the display on the Mediamaster indicates “TV” dur-
ing watching terrestrial channels, and the channel name during
watching programmes from the Mediamaster.

Pressing the 

TEXT

 button 

twice

 will give the teletext menu,

(if teletext is transmitted). Select pages with the number buttons
on the remote control.
You can also quickly step to the different subpage alternatives
shown in any page by pressing the 

LEFT/RIGHT

 buttons. Press

OK

 on a selected number, and the page will show up.

Содержание Mediamaster 9200S





























Отзывы: