background image

GB 18

List of TV channels

During the viewing of TV you get a programme list onto the
screen by pressing the 

OK

 button.

You can change to another channel by stepping with the 

UP/

DOWN

 buttons and then press the 

OK

 button.

To move faster (10 channels at a time) between channels you can
also use the 

double arrow

 buttons.

List of Radio channels

During listening to Radio Programmes you get a programme list
on the screen by pressing the 

OK

 button.

You can change to another channel by stepping with the 

UP/

DOWN

 buttons and then press the 

OK

 button.

To move faster (10 at the time) between the channels you can
also use the 

double arrow

 buttons.

Volume level

Increase or decrease the sound level by pressing the “

+

” and “

-

buttons.
A control bar will be displayed on the screen during level adjust-
ment. (The max. level for volume is the current volume setting
on the TV set).

Please note, that the volume adjustments also change the vol-
ume level to your VCR during recording.

It is possible to turn the sound on and off with the    button.
Sound off is indicated with the same symbol on the screen.

If you turn the volume off with this button, it does not affect the
volume to the VCR during recording.

Содержание Mediamaster 9200S





























Отзывы: