manualshive.com logo in svg

Nokia IPSO 4.0, Справочное руководство

Поделиться
Скачать
Nokia IPSO 4.0 Скачать руководство пользователя страница 291

Nokia Network Voyager for IPSO 4.0 Reference Guide

291

To configure S/Key

1.

Click Users under Configuration > Security and Access Configuration in the tree view.

2.

Enable the Admin S/Key or Monitor S/Key by selecting either the Allowed or Required 
radio buttons.

„

Disabled—S/Key passwords are turned off and cannot be used. 

„

Allowed—the user can use either a standard text password or an S/Key one-time 
password.

„

Required—only S/Key one-time passwords are allowed for connecting through Telnet or 
FTP.

3.

Click Apply.

The Current Standard password, S/Key Secret Password, and S/Key Secret Password 
(verify) text boxes appear.

4.

Enter the current standard password in the Current Standard password text box.

5.

Choose a secret password for S/Key that is between four and eight alphanumeric characters 
long, and enter it in the S/Key Secret Password text box.

6.

Enter the S/Key secret password again in the S/Key Secret Password (verify) text box.

7.

Click Apply.

The sequence number and the seed appear. The sequence number begins at 99 and goes 
backward after every subsequent S/Key password is generated. The seed is associated with 
the S/Key secret password.

8.

Click Save to make your changes permanent.

Using S/Key

You must have an S/Key calculator on your platform to generate the S/Key one-time password 
(OTP). Many UNIX-derived and UNIX-like systems include the S/Key calculator command 
key. Many GUI calculators include support for MD4 (S/Key) algorithms and MD5 (OPIE) 
algorithms. Be sure to configure such calculators to use MD4 algorithms.

Note

The OTP is typically a string, or strings, that contain a series of words, for example, NASH 
TINE LISA HEY WORE DISC. You must enter all the words in the valid string at the 
password prompt.

To use the S/Key

1.

Log in to the firewall with a Telnet or FTP client. 

2.

At the prompt, enter either admin or monitor as a user name.

3.

The server returns an S/Key challenge, which is comprised of the S/key sequence number 
and seed, for example, 95 ma74213. 

Содержание IPSO 4.0































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды