![Nokia E62 Скачать руководство пользователя страница 82](http://html.mh-extra.com/html/nokia/e62/e62_service-manual_254187082.webp)
CU-4
Control unit
CU-4 is a general service tool used with a module jig and/or a flash
adapter. It requires an external 12 V power supply.
The unit has the following features:
• software controlled via USB
• EM calibration function
• Forwards FBUS/Flashbus traffic to/from terminal
• Forwards USB traffic to/from terminal
• software controlled BSI values
• regulated VBATT voltage
• 2 x USB2.0 connector (Hub)
• FBUS and USB connections supported
When using CU-4, note the special order of connecting cables and
other service equipment:
Instructions
1 Connect a service tool (jig, flash adapter) to CU-4.
2 Connect CU-4 to your PC with a USB cable.
3 Connect supply voltage (12 V)
4 Connect an FBUS cable (if necessary).
5 Start Phoenix service software.
Note:
Phoenix enables CU-4 regulators via USB when it is
started.
Reconnecting the power supply requires a Phoenix restart.
RM-88
Nokia Customer Care
Service Tools and Service Concepts
Page 4 –6
COMPANY CONFIDENTIAL
Issue 1
Copyright © 2006 Nokia. All rights reserved.
Содержание E62
Страница 185: ...8 System Module Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page 8 1 Copyright 2006 Nokia All rights reserved ...
Страница 215: ...9 Schematics Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page 9 1 Copyright 2006 Nokia All rights reserved ...
Страница 232: ...RM 88 Schematics Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page 9 18 Copyright 2006 Nokia All rights reserved ...
Страница 233: ...Glossary Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page Glossary 1 Copyright 2006 Nokia All rights reserved ...