•
Access point in use
— Select the default access point
to connect to the multimedia message center. You
may not be able to change the default access point
if it is preset in your device by your service provider.
•
Multimedia retrieval
— Select
Always automatic
to
always receive multimedia messages automatically,
Auto. in home network
to receive notification of a
new multimedia message that you can retrieve from
the message center (for example, when you are
traveling abroad and are outside your home
network),
Manual
to retrieve multimedia messages
from the message center manually, or
Off
to prevent
receipt of any multimedia messages.
•
Allow anon. msgs.
— Select whether you want to
receive messages from unknown senders.
•
Receive ads
— Select whether you want to receive
messages defined as advertisements.
•
Receive report
— Select
Yes
to have the status of the
sent message to be shown in the log (network
service). Receiving a delivery report of a multimedia
message that has been sent to an e-mail address
may not be possible.
•
Deny report sending
— Select
Yes
to not send
delivery reports from your device for received
multimedia messages.
•
Message validity
— Select how long the messaging
center tries to send the message (network service).
If the recipient of a message cannot be reached
within the validity period, the message is removed
from the multimedia messaging center.
Maximum
time
is the maximum amount of time allowed by the
network.
E-mail messages
To receive and send mail, you must have a remote
mailbox service. This service may be offered by an
Internet service provider, a network service provider, or
your company. Your device is compliant with Internet
standards SMTP, IMAP4 (revision 1), and POP3, and with
different push e-mail solutions. Other e-mail providers
may offer services with different settings or features
than those described in this user guide. Contact your e-
mail provider or service provider for more details.
Before you can send, receive, retrieve, reply to, and
forward mail on your device, you must also do the
following:
•
Configure an Internet access point (IAP). See "Access
•
Set up an e-mail account, and define the e-mail
settings correctly. See "E-mail account
Follow the instructions from your remote mailbox and
Internet service providers. Contact your network and
Internet service providers or operator for the correct
settings.
Set up your e-mail
If you select
Mailbox
and have not set up your e-mail
account, you are prompted to do so. To start setting up
the e-mail account with the mailbox guide, select
Yes
.
1. To start entering the e-mail settings, select
Start
.
2. In
Mailbox type
, select
IMAP4
or
POP3
, and select
Next
.
37
Me
ssage
s
file:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml
Page 37
Jun 26, 2006 9:34:16 AM
file:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml
Page 37
Jun 26, 2006 9:34:16 AM
