Nokia E50, Руководство пользователя

Страница: 67 / 85

• Line change — Select Disable to prevent line
selection (network service). To change this setting,
you need the PIN2 code.
Connection settings
Select Menu
>
Tools
>
Settings
>
Connection and from
the following:
• Access points — Set up new or edit existing access
points. Some or all access points may be preset for
your device by your service provider, and you may
not be able to create, edit, or remove them.
• Packet data — Determine when packet data
connections are used, and enter the access point if
you use your device as a modem for a computer.
• Internet tel. settings — Define settings for net calls.
• SIP settings — View or create session initiation
protocol (SIP) profiles.
• Data call — Set the time-out period after which data
call connections automatically end.
• VPN — Install and manage VPN policies, manage VPN
policy servers, see the VPN log, and create and
manage VPN access points.
• Configurations — View and delete trusted servers
from which your device may receive configuration
settings.
To obtain information about subscribing to a packet
data service and the appropriate connection and
configuration settings, contact your network operator
or service provider.
The settings available for editing may vary.
Access points
Select Menu
>
Tools
>
Settings
>
Connection
>
Access
points .
An access point is where your device connects to the
network by way of a data connection. To use e-mail and
multimedia services or to browse web pages, you must
first define access points for these services.
An access point group is used for grouping and
prioritizing access points. An application can use a
group as a connection method instead of a single access
point. In that case, the best available access point inside
a group is used for making the connection, and in case
of e-mail, also for roaming.
Some or all access points may be preset for your device
by your service provider, and you may not be able to
create, edit, or remove them.
See "Internet access points," p. 49.
Packet data
Select Menu
>
Tools
>
Settings
>
Connection
>
Packet
data .
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your
device in the GSM network, it is possible to have
multiple data connections active at the same time;
access points can share a data connection, and data
connections remain active (for example, during voice
calls). See "Connection manager," p. 55.
67
Settin
gs
file:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 67 Jun 26, 2006 9:34:16 AM file:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 67 Jun 26, 2006 9:34:16 AM