Programming is completed when Flashing Completed message is displayed.
The product type designator and MCU SW version are displayed in the status bar.
vi Close the
SW Update
window and then choose File
→
Close Product .
2. Create a
Request
file.
For this procedure, you must 12 V to CU-4 from an external power supply.
i
To connect the phone with
Phoenix
, choose File
→
Scan Product .
ii Choose Tools
→
Certificate Restore .
iii To choose a location for the request file, click Browse.
RM-352; RM-354
BB Troubleshooting and Manual Tuning Guide
Issue 1
COMPANY CONFIDENTIAL
Page 3 –37
Copyright © 2008 Nokia. All rights reserved.
