B a s i c u s e
12
■
Mute or unmute the microphone
To mute the microphone, slide the mute key toward your mouth. To
unmute the microphone, slide the mute key to the opposite direction.
When you mute or unmute the microphone, the headset beeps twice.
■
Switch a call between headset and mobile device
To switch a call between the headset and a connected device, press and
hold the answer/end key for about 2 seconds, or use the respective
function in your device.
■
Connect the headset to two devices
You can have the headset connected to two devices at the same time. To
pair and connect the headset to two devices, see “Pair and connect the
headset”, p. 8, and “Reconnect the headset”, p. 9.
By default, the headset can only be connected to one device at a time.
To allow the headset to connect to two devices at the same time, switch
off the headset, and press and hold the power key and the volume up key
for about 5 seconds. The blue indicator light flashes twice.
To allow the headset to connect to only one device at a time, switch off
the headset, and press and hold the power key and the volume down key
for about 5 seconds. The green indicator light flashes twice.
If the headset can connect to two devices at the same time and you use
redialling or voice dialling, the call is made on the device that you last
used to make a call when the headset was connected to it. When you
make or answer a call, the other connected device is disconnected until
the call ends.
■
Clear settings or reset
To clear all the pairing settings from the headset, switch off the headset,
and press and hold the power key and the answer/end key at the same
time for about 5 seconds. The headset beeps twice, and the red and
green indicator lights alternate. After the settings are cleared, the
headset enters the pairing mode.
