background image

SNMP manager

117

5. SNMP manager

The Nokia A032 has a built-in SNMP Agent 
capability which allows integration into SNMP 
managed enterprise environments. The Agent 
supports SNMP V1.0 requests and provides data 
from the following MIBs (supplied as files when 
you install from the 

Nokia A032 Utilities CD-

ROM

, as explained in 

Appendix D

):

The source text for these MIBs is provided on 
the Utilities CD-ROM supplied with your Access 
Point. The MIBs are provided in ASCII text 
format for easy incorporation into SNMP 
Manager Products.

The Nokia A032 supports Get, Get Next and 
Trap operations but does not support Set 
operations

Items which are listed as Read/Write in the MIB 
will cause an error response if a Set command 
is issued.

Data

Supplied in file

RFC1213 (MIBII)

RFC1213.mib

IANAifType.mib

IEEE802.11 MIB

IEEE80211.mib

ETHERLIKE MIB (partial)

ETHERLIKE.mib

Nokia A032 Proprietary MIB

Nokia-A032-MIBv1.mib

A032-Adv.book  Page 117  Monday, November 13, 2000  10:47 AM

Содержание A032



























































































































































































































Отзывы: