Nokia 8208, Руководство по обслуживанию

Страница: 109 / 170

RM-384
RF Troubleshooting
Issue1 Company Confidential Page 4-21
Copyright © 2008 Nokia. All rights reserved.
Use the following steps to configure FTM for RF troubleshooting.
1.
Connect RF test connector to a CMU. ( Input RF 1575.55MHz = -30dBm. )
2. Connect mobile terminal to a PC via the Module Jig, and connect a power supply.
3.
Open RF Toolkit in L3 program. The RF Toolkit appears.
4. Set Start RF connection in “connection” box
5. Change to FTM in “phone mode setting” box.
6. Select a Band (GPS) in “Band setting” box.
GPS DC, RF test point and Troubleshooting
Figure 46
RF GPS checking test point