Nokia 7200 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 24

Nokia 7200 Скачать руководство пользователя страница 20

nokia

EOPLE

C

ONNECTING

P

4)

NMP/CMO Sales and Marketing

Approved 1.0

Customer Care EMEA

DJk

Technical Services, Repair Concepts

Confidential

03.03.2004

Service Manual 7200 Level 1&2

Copyright 2003-2004 © Nokia Corporation

PAGE 20 (2

15. INFRARED GONOGO TEST

Infrared test

You need another infrared device (e.g. 6310i) to do a GoNoGo test. The infrared windows of the devices

must be directed to each other and should have a distance of approximate 15 cm. Make sure that infrared is

activated in receiver device.

Warning:

Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with other IR devices.

This device is a Class 1 Laser product.

Test unit

Reference unit, infrared activated

•

From Home Menu, push the Menu key (lower key)

down. This displays Phonebook

entries.

•

If phone and SIM memory is empty, create one new entry.

•

Choose one phonebook entry and select

Details.

•

Select

Options

•

Select

Send bus. Card

•

Select

Via infrared

If sending of business card fails, make sure again that infrared windows are directed to each other
and infrared is activated in reference device. Then try again sending.
Test was successful, if you get a confirmation message on receiver device.
You will

not

get a confirmation on sender device.

«
...
18
19
20
21
22
...
»

Содержание 7200

























Отзывы:

Нет отзывов