Access point
— Select the access point to use for the
connection, or create a new access point. You can also choose
to be asked for the access point every time you start a
connection. This setting is available only if you have selected
Internet
as the bearer type.
Host address
— Enter the web address of the configuration
server.
Port
— Enter the port number of the server.
User name
and
Password
— Enter your user ID and
password for the configuration server.
Allow configuration
— Select
Yes
to allow the server to
initiate a configuration session.
Auto-accept all requests
— Select
Yes
if you do not want
the server to ask for your confirmation when it initiates a
configuration session.
Network authentication
— Select whether to use http
authentication.
Network user name
and
Network password
— Enter your
user ID and password for the http authentication. This setting
is available only if you have selected
Network
authentication
to be used.
To connect to the server and receive configuration settings
for your device, select
Options
>
Start configuration
.
To view the configuration log of the selected profile, select
Options
>
View log
.
To update the device software over the air, select
Options
>
Check for updates
. The update does not erase
your settings. When you receive the update package on your
device, follow the instructions on the display. Your device is
restarted once the installation is complete.
Downloading software updates may involve the transmission
of large amounts of data (network service).
Make sure that the device battery has enough power, or
connect the charger before starting the update.
Warning:
If you install a software update, you cannot use the device,
until the installation is completed and the device is restarted.
Be sure to back up data before accepting installation of an
update.
Remote configuration 43
www.nokia.com/support
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
