C a l l f u n c t i o n s
23
Make a voice dialing call
If an application is sending or receiving data using a packet data
connection, end the application before you use voice dialing.
Voice commands are language-dependent. To set the language, see
Voice playback language
in “Phone,” p. 70.
Note:
Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.
1. In the standby mode, press and hold the right selection key. A short
tone is played, and
Speak now
is displayed.
If you are using a compatible headset with the headset key, press and
hold the headset key to start the voice dialing.
2. Say the voice command clearly. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of
the match on the top of the list. After about 1.5 seconds, the phone
dials the number; or if the result is not the correct one, scroll to
another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is
similar to voice dialing. See
Voice commands
in “My shortcuts,” p. 62.
■
Answer or decline a voice call
To answer a call, press the call key. To answer the call by opening the
slide, see also
Slide call handling
in “Call,” p. 69.
To mute the tone before you answer the call, select
Silence
.
To end the call or decline a call, press the end key.
Call waiting
During a call, to answer the waiting call, press the call key. The first call
is put on hold. To end the active call, press the end key.
To activate the
Call waiting
function, see “Call,” p. 69.
