11. Choose file JBV1v18.CDE and click Open to update your JBV-1 to a new version (v.18).
Figure 65 JBV-1 update directory window
Wait until you hear a "click" from the JBV-1.
The older SW file JBV1v17.CDE is visible in this view only if the previous JBV-1 SW package has been installed
on your computer.
12. Click OK to see the current JBV-1 status (after a successful update).
Figure 66 JBV-1 SW update done
Figure 67 JBV-1 SW status
You have now updated the software of your JBV-1 docking station and it is ready for use.
Next action
If you have several docking stations you need to update, disconnect the power and USB cables from the previous
one and connect them to the next docking station. First, click Refresh Status to see the current SW version and
then Update Firmware to update the software.
After you have updated all docking stations, close the JBV-1 Firmware Update dialog box.
RM-25
Nokia Customer Care
Phoenix service software
Page 3–34
Company Confidential
9235618 (Issue 2)
Copyright ©2005 Nokia. All Rights Reserved.
