Figure 143 Synthesizer key components without shielding frames
Assumption
• No soldering or component failure for simple SMD components such as resistors, inductors and capacitors
• Failure in one particular operating GSM channel, whether Tx or Rx, in which the synthesizer is the cause of
the failure, causes failure in all other GSM channels in Tx/Rx.
Preparing for synthesizer troubleshooting
Steps
1.
Place the phone (mechanics removed) on module jig.
2.
Connect the module jig to the PC via a DAU-9P cable.
3.
Connect the module jig to a power supply (4.2V).
4.
Connect the RF output to a spectrum analyzer or another measurement instrument.
5.
Use a 10dB attenuator at the input to spectrum analyzer to avoid damage.
6.
Make sure the dongle is connected and start Phoenix.
7.
In Phoenix, select File -> Open Product -> RM-25 (Nokia 6260) Product Menu.
8.
Select Testing -> RF Controls.
9.
In the toolbar: set Operating Mode -> Local.
10. Select Band -> GSM 1800.
11. Set Operation Mode -> Continuous.
12. Set Active Unit -> Rx.
RM-25
Nokia Customer Care
RF troubleshooting
Page 7–42
Company Confidential
9235618 (Issue 2)
Copyright ©2005 Nokia. All Rights Reserved.
