Nokia 6230i - Cell Phone 32 MB, Руководство пользователя

Страница: 54 / 217

M e n u f u n c t i o n s
53
Send and receive data
1. Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices.
2. To activate the IR port of your phone to receive data using IR, select Menu >
Settings > Connectivity > Infrared .
3. The user of the sending phone selects the desired IR function to start
data transfer.
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is canceled and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or a
connection has been lost.
EGPRS
General packet radio service (GPRS) is a network service that allows mobile phones
to send and receive data over an Internet protocol (IP) -based network. GPRS is a
data bearer that enables wireless access to data networks such as the Internet.
Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more
information on availability of EGPRS and data transfer speed, contact your network
operator or service provider.
The applications that may use EGPRS are MMS, video streaming, browsing sessions,
e-mail, remote SyncML, Java application downloading, and the PC dial-up.
When you have selected GPRS as a data bearer, the phone uses EGPRS instead of
GPRS if this is available in the network. You cannot select between EGPRS and
GPRS, but for some applications you may be able to select GPRS or
GSM data
(circuit switched data, CSD).
EGPRS connection
Select Menu > Settings > Connectivity > GPRS > GPRS connection and from the
following options:
Always online — to set the phone to automatically register to an EGPRS network
when you switch the phone on. indicates that EGPRS service is available.
If you receive a call or a text message or make a call during a EGPRS connection,
indicates that the EGPRS connection is suspended (on hold).
When needed — to set the EGPRS registration and connection to established when
an application using EGPRS needs it and closed when you end the application.