Nokia 6111 RM-82, Руководство по обслуживанию, Страница: 46 / 254

• Run the application file (for example,
phoenix_service_sw_a15_2004_24_7_55.exe
) and follow the
instructions on the screen.
Note: Administrator rights may be required to be able to install Phoenix depending on the operating
system.
If uninstalling or rebooting is needed at any point, you will be prompted by the Install Shield program.
Context
If at any point during installation you get this message, Dongle is not found and installation cannot continue:
Figure 8 Dongle not found
Possible reasons may be a defective or too old PKD-1 Dongle (a new dongle has a six digit serial number).
Check the COM/parallel ports used first! After correcting the problem the installation can be restarted.
For more detailed information, please refer to Phoenix Help files. Each feature in Phoenix has its own Help
function, which can be activated while running the program. Press the F1 key or the Help button to activate
a Help file.
Steps
1. Run the
phoenix_service_sw_a15_2004_24_7_55.exe
to start installation. Install Shield prepared the setup.
Figure 9 Preparing setup
RM-82
Nokia Customer Care Phoenix service SW
Page 3 –6 COMPANY CONFIDENTIAL Issue 1
Copyright © 2005 Nokia. All rights reserved.