M e s s a g i n g
50
Image size (multimedia)
— to define the default image size used in
multimedia messages
Default slide timing
— to define the default time between slides in
multimedia messages
Allow multimedia reception
>
Yes
or
No
— to receive or block the multimedia
message. If you select
In home network
, you cannot receive multimedia messages
when outside your home network. The default setting of the multimedia message
service is generally
In home network
.
Incoming multimedia messages
— to allow the reception of multimedia messages
automatically, manually after being prompted, or to decline the reception.
This setting is not shown if
Allow multimedia reception
is set to
No
.
Allow advertisements
— to receive or decline advertisements. This setting is not
shown if
Allow multimedia reception
is set to
No
or
Incoming multimedia messages
is set to
Reject
.
Configuration settings
>
Configuration
— only the configurations that support
multimedia messaging are shown. Select a service provider,
Default
, or
Personal
config.
for multimedia messaging. Select
Account
and a multimedia messaging
service account contained in the active configuration settings.
E-mail messages
The settings affect the sending, receiving, and viewing of e-mail. You may receive
the settings as a configuration message. See “Configuration settings service,”
p. 12. You can also enter the settings manually. See “Configuration,” p. 71.
Select
Menu
>
Messaging
>
Message settings
>
E-mail messages
and from the
following options:
Configuration
— to select the set that you want to activate
6085.EN_ESv1_9253443.book Page 50 Saturday, December 2, 2006 8:26 AM