Nokia 5500, Руководство пользователя

Страница: 78 / 128

T o o l s
78
Copyright © 2006 Nokia. All rights reserved.
date and time format and
separators, select
Menu > Tools >
Settings > Date and time and
from the following options:
Time and Date — to set the time
and date
Time zone — to set the time zone
of your location. If you set
Network operator time > Auto-
update , the local time is shown.
Date format — to select the
format to display dates
Date separator — to select the
date separator
Time format — to select between
24-hour and 12-hour time format
Time separator — to select the
time separator
Clock type — to select whether the
analog or digital clock is shown in
the standby mode. See
“Clock” p.
63 .
Clock alarm tone — to select the
alarm clock tone
Network operator time (network
service) — to allow the network to
update time, date, and time zone
information to your phone. If you
select
Auto-update , all active
connections are disconnected.
Check any alarms as these may be
affected.
Security
Phone and SIM
You can change the following
codes: lock code, PIN code, and
PIN2 code. These codes can only
include the numbers from 0 to 9.
Avoid using access codes similar to
emergency numbers, to prevent
accidental dialing of the
emergency number.
To set the security settings, select
Menu > Tools > Settings >
Security > Phone and SIM and
from the following options:
Code in use — to select the active
code, PIN or UPIN , for the active
USIM. This is shown only if the
active USIM supports UPIN, and
the UPIN is not rejected.
PIN code request (or UPIN code
request ) — to set the phone to
request the code each time the
phone is switched on. Some SIM
cards may not allow the PIN code
request to be turned
Off . If you
select Code in use > UPIN , UPIN
code request is shown instead.
PIN code (or UPIN code ) / PIN2
code / Lock code — to change the
codes
Autolock period — to set a
time-out after which the phone is
automatically locked. To use the
phone again, you need to enter the