Nokia 260S Mediamaster, Руководство пользователя

Страница: 28 / 39

Navi Bars
GB 28
Settings folder
—
Antenna
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory .
The procedure is performed the same way it was during the First-
Time Installation. For more information, see page 10.
Settings folder
—
Channel
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory .
The procedure is performed the same way it was during the First-
Time Installation. For more information, see page 10.
Settings folder
—
TV
To open this menu, you will be asked to enter your access code. The
access code is set to 1234 at the factory .
You can adjust the audio/video settings for your receiver.
• Press opt to view the TV picture on the screen.
TV screen format
Select your TV screen format.
The 4:3 format is the standard format for most TV screens.
Select 16:9 for a wide-screen TV.
Adjust picture horizontally
Adjust the horizontal position of the TV picture using the cursor
left/right button.
Set transparency level
Adjust the transparency level of the graphics in the menus using the
cursor left/right button.
Select digital audio format
Select an audio format for digital output (the upper audio output
on the rear of the Mediamaster). Select AC-3 when the sound is
transmitted in Dolby™ Digital format. Select PCM for ordinary digital
sound.
NOTE : when you select AC-3, there will not be any sound
output from the analogue audio connections.