manualshive.com logo in svg

Nokeval FTR970-PRO, Руководство пользователя

Поделиться
Скачать
Nokeval FTR970-PRO Скачать руководство пользователя страница 18

18

Reading (updated automatically)

Channel reading

Battery (updated automatically)

Battery voltage of the device

Signal (updated automatically)

Received signal strength.
(About -100dBm = barely receivable, -65dBm = maximum strength) 

Age (updated automatically)

Tells how many minutes has passed since last reception. Note! This value is updated once in a min-
ute for all channels simultaneously, which means that value can increment any time after 1-60s after 
packet reception.

Serial commands

In case PromoLog is not used for reading data from the device, following commands can be used 
to read data.

Following commands are usable for reading channel information. Different protocols are fully ex-
plained in their own chapters, here is a quick summary of each protocols available commands.

Nokeval SCL protocol

MEA CH 

 

Read channel reading

Modbus RTU protocol

03 (Read Holding Registers) 

Readings mixed with settings

04 (Read Input Registers) 

Read readings and other channel information either as fl oat-
ing point or integer number.

Modbus register map in Modbus chapter.

Nokeval Nopsa commands (transport protocol SCL or Modbus RTU)

2/0 (Out value request)  

Read channel reading

2/1 (Out resource request)  

Read channel meta information (name, data type)

4/32 (Channel count) 

Channel count

4/33 (Changed channels) 

Bit fi eld of changed channels after last read operation

4/34 (Read channels with index) 

Read all channel information of certain channel

4/35 (Read next channel) 

Read all channel information of next changed channel

 Data structure

Data structure of Nopsa commands (4/34, 4/35).

ID 

   

2 bytes, 16bit integer, least signifi cant byte fi rst.

Reading 

   

4 bytes, IEEE fl oating point number.

Type 

   

1 byte, integer. See following table for types.

Signal strength 

   

1 byte, integer. Subtract 127 and result is in dBm.

Battery voltage 

   

1 byte, integer. Divide with 10 and result is in Voltage.

Содержание FTR970-PRO







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды