Input and output voltages
Tymp Legio’s CV-modulation inputs expect signals from 0v to +5v.
The Pitch input’s range is -2v to +5v.
The Hit input responds to a rising edge 1.6v.
The Quack audio inputs are AC coupled and respond to any Eurorack audio signals.
The audio output can reach up to 16v peak to peak.
Swapping firmware
Tymp Legio’s firmware can be updated by the user via our firmware webapp on the
Noise Engineering Customer Portal
. Alternate firmwares available now transform the TL into
completely different modules.
To update the firmware on your Legio:
1. Turn off the power to your case and unscrew the module.
2. Remove the power connector on the back of the module.
3. Plug a micro USB connector into the port on the back of the module, and the other
end into your computer.
4. Follow the instructions in the webapp.
Calibration
Tymp Legio features extremely accurate pitch tracking and an autocalibration system. The modules
are autocalibrated and tested at the factory, but should you feel you need to recalibrate, just power
the unit on with nothing patched to the pitch CV input. The module will calibrate itself during startup.
Special Thanks
starthief
5
