33
This page allows you reserve IP addresses, and assign the same IP address to the network
device with the specified MAC address any time it requests an IP address. This is almost
the same as when a device has a static IP address except that the device must still request
an IP address from the DHCP server.
Domain Name:
this represents the name of your IP address.
802.1d Spanning Tree:
Multiple interconnected bridges create larger networks using the
IEEE 802.1d Spanning Tree Protocol (STP), which is used for finding the shortest path
within the network and to eliminate loops from the topology. If the STP is turned on, the
router will communicate with other network devices by sending and receiving Bridge
Protocol Data Units (BPDU). STP should be turned off (selected by default) when this
router is the only bridge on the LAN or when there are no loops in the topology as there is
no sense for the bridge to participate in the Spanning Tree Protocol in this case.
5.4.2 WAN Interface
This page is used to configure the parameters for Internet network which connects to the
WAN port of your Access Point. Most of the settings we have discussed on
P16 Setup
Wizard.
If you want to change any parameters, please reset here and click
Apply
button.
WAN Access Type:
there are five modes provided to allow you to access Internet. Please
choose the appropriate one according to the information from your ISP (Internet Service
Содержание NG-192
Страница 1: ...1 ...
