14
Enable NTP client update: NTP
means Network Time Protocol which is used to make the
computer time synchronized with its server or clock source, such as Quartz and GPS. It can
provide high-precision time correction and prevent harmful protocol attack by confirming
encryption. You need to check this box to activate this page.
Automatically Adjust Daylight Saving:
If the Time Zone you choose implements daylight
saving time, please select this option.
Time Zone Select:
Select the Time Zone where the router is located.
NTP server:
Please choose the corresponding NTP server to get right time.
4.3.3 LAN Interface
This page is used to configure the parameters for local area network which connects to the
LAN port of your Access Point.
IP Address:
this is the IP address to be represented by the LAN (including WLAN)
interface that is connected to the internal network. This IP will be used for the routing of the
internal network (it will be the Gateway IP for all the devices connected on the internal
network).
Subnet Mask:
this is used to define the device IP classification for the chosen IP address
range. 255.255.255.0 is a typical netmask value for Class C networks which support IP
address range from 192.0.0.x to 223.255.255.x. Class C network netmask uses 24 bits to
identify the network and 8 bits to identify the host.
4.3.4 WAN Interface
This interface is used to configure the parameters for Internet network which connects to
the WAN port of your Access Point.
Note:
If this IP address changed, you can log into the WEB configuration interface only
using the new IP address. AND if the new IP address and the original IP address are not in
the same segment, the Virtual Server and DMZ Host service will not work. If you need to
enable these functions, you will have to reset this IP address.
Содержание NG-192
Страница 1: ...1 ...
