Nodka eBOX-3000, Руководство пользователя

Страница: 22 / 50

15
E
m
b
e
d
d
e
d
F
a
n
le
s
s
B
o
x
P
C
e
B
O
X
-3
0
0
0
U
s
e
r M
a
n
u
a
l
BIOS Setup 2.2
The BIOS is programmed onto the BIOS chip, the BIOS setup program allows
changes to certain system settings. This chapter outlines the options that can be
changed.
NOTE:
Some of the BIOS options may very throughout the life cycle of the
product and are subject to change without prior notice.
Starting setup 2.2.1
The AMI is activated when the computer is turned on. The setup program can be
activated in one of two ways:
1. Press the DEL key as soon as the system is turned on.
2. Press the DEL key when the Press Del to enter SETUP tip appears on the
screen.
If the message disappears before the DEL key is pressed, restarted the computer
and try again. General Introduction
Using setup 2.2.2
Use the arrow keys to highlight items. Press ENTER to select, use the PAGE UP and
PAGE DOWN keys to change entries. Press F1 for help and press ESC to quit.
Navigation keys are shown as table below.
Table 2-1 Keys of BIOS navigation
Key Function
Up arrow Move to previous item
Down arrow Move to next item
Left arrow Move to the item on the left side
Right arrow Move to the item on the right side
ESC Reset
+ Increase the numeric value or make changes
- Decrease the numeric value make changes
F1 General help, only for the status page setup menu and option page setup menu
F2 Previous value
F3 Optimized defaults