Nodexon NX-6510S-20X4S2Q Series Switch Product Guide
The
NX-6510S-20X4S2Q
switch draws air
from bottom to top using the rear panel fan to ensure that the device works
properly in the specified environment. Make sure to maintain a minimum distance of 100 mm around the device for
ventilation.
Figure 1-4 Heat Dissipation
1.4.2 RG-PA150I-F
The
NX-6510S-20X4S2Q
switch
supports RG-PA150I-F. RG-PA150I-F is a smart power module and supports
communication with the switch and asset management, including model, version number and SN. The power module
can be hot swapped and supports asset management, including model, version number and SN.
The
NX-6510S-20X4S2Q
switch
supports 1+1 power redundancy. To improve the stability and reliability, it is
recommended to configure 1+1 power redundancy. When the two power modules work normally, the switch is in
the status of current sharing.
The system requires at least one power module. Please install a blank panel in each vacant slot to maintain proper
cooling and air flow throughout the system.
Power Model
RG-PA150I-F (AC input)
RG-PA150I-F (HVDC input)
Rated Voltage
100 VAC to 240 VAC
50/60 Hz
240 VDC
