- AVOID BODY CONTACT with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
- DO NOT EXPOSE TO RAIN AND WET CONDITIONS. Water entering a power tool
will increase the risk of electric shock.
- DON’T ABUSE CORD. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges, and moving parts.
Damaged or entangled cords increase the risk of electric shock.
- USE EXTENSION CORD WHEN OUTSIDE. When operating a power tool outdoors,
use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
- USE RESIDUAL CURRENT DEVICE IF DAMP CONDITIONS ARE UNAVOIDABLE. If
operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
PERSONAL SAFETY
- STAY ALERT. Watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol, or medication. A moment of inattention while operating power tools
may result in serious personal injury.
- USE SAFETY GLASSES AND OTHER SAFETY EQUIPMENT. Protective equipment
such as safety glasses, gloves, dust-masks, non-skid safety shoes, hard hats,
and/or hearing protection used for appropriate conditions will reduce personal
injuries.
- PREVENT UNINTENTIONAL STARTING. Ensure the switch is in the off-position
before connecting to the power source and/or battery pack, picking up, or carrying
the tool. Carrying power tools with your finger on the switch or connecting the
appliance to the mains when it is switched on, can lead to accidents.
- REMOVE ANY ADJUSTING KEY OR WRENCH before turning the power tool on. A
wrench or a key left attached to a rotating part of a power tool may result in
personal injury.
3
