CLEANING AND MAINTENANCE
Before any work on the machine itself, pull the mains plug. For safe and proper
working, always keep the machine and ventilation slots clean.
Cleaning
Keep all safety devices, air vents, and motor housing free of dirt and dust as much
as possible. Wipe the equipment with a clean cloth or blow it with compressed air
at low pressure.
We recommend that you clean the device immediately each time you have finished
using it.
Clean the equipment regularly with a moist cloth and some soft soap. Do not use
cleaning agents or solvent; these could damage the plastic housing of the tool.
Ensure that no water can seep into the device.
Maintenance
There are no parts inside the tool which require additional maintenance. If the
replacement of the supply cord is necessary, this must be done by an authorized
service agent in order to avoid a safety hazard.
Disposal and recycling
The unit is supplied in packaging to prevent it being damaged in transit. This
packaging is raw material and can therefore be reused or can be returned to the
raw material system. Electrical products should not be discarded with household
products. Electrical products used must be collected separately and disposed of at
collection points provided for this purpose. Talk with your local authorities or dealer
for advice on recycling.
13
