your power tools and they will love you back.
For safety reasons and your overall peace of mind, we recommend having your
electric drill given a once-over by an expert once every 12 months to ensure that it
will continue to operate safely. We must mention that all (potentially deviating)
national inspection and maintenance regulations must be observed.
How to clean your jig set
For the most part, you'll face the issue of dust or dirt in or around the drill guide
holes and alien debris clogging the vents of your drill.
✔
✔
To clean your drill
-
wipe the drill chuck and body with a soft dry cloth.
To clean the drill guide holes
- visually check that there is nothing clogging
the holes and use compressed dry air at low pressure to remove any debris
and again wipe clean with a soft dry cloth.
NB!
Do not use cleaning agents or solvents, as they may damage the plastic parts.
In between cleanings, keep all safety devices, air vents, and the motor housing
away from dirt, dust, and water as much as possible.
JIG SET LIABILITY
This product is covered by an EU directive, valid since 01.01.1990, specifying that
the manufacturer is only liable for products if all the parts originate from the
manufacturer or are approved by them, and if the units are mounted and operated
properly.
If accessories or spare parts from third parties are used, liability can be partially or
completely inapplicable. So no using those shifty parts you picked up on the cheap.
In extreme cases the responsible authorities can prohibit the use of the entire unit.
28
