As long as you follow the steps taken in each of the following images, you
shouldn’t have any problems at all, but if there is anything that still isn’t clear or
that you don’t understand, email us at
.
When using ½ inch and
⅝
⅝
material thickness
1.
Set your jig to the ‘-3/8’ mark
(pictured above) at the edge of the
wood using the side measurement.
2.
Set your jig to ‘0 in’ setting using the
pocket hole indicator arrow.
3.
Set your drill collar stop 4 and ¼ in
back from the shoulder of the drill. See
page 23 for how to do this.
4
.
Use 1 inch length screws.
15
