GB/USA
Read and follow these safety precautions and instructions carefully before use.
This product is a model building item and not a toy. For appropriate application and use, tools like a sharp
cutter, a sharp pair of scissors and special glue are necessary. Therefore, appropriate work with this
model building product does pose risk of injury! For that reason this product is not for children!
Keep this product as well as all accessories (glue, paints, cutter etc.) out of reach of children under 3 years of age! Let
children build this kit only if supervised by a competent adult modeller.
For the use of paints and glues please follow these safety precautions carefully: Do not eat, drink or smoke. Avoid any contact
with eyes, skin or mouth. Do not breathe any vapours. Keep away from ignition sources. Follow the instructions and safety precautions
of the manufacturer carefully. First aid for contact with eyes: Flush the eye with clean water holding the eyelid open. Immediately
consult medical advice.
60135 Gras-Master 2.0
The NOCH Gras-Master 2.0 has been awarded several prizes and is the perfect tool for applying static grass on a model landscape.
Thanks to the electrostatic technique the grass fibres get electrostatically charged and will land in a vertical position on the scenery.
Easy to use:
Brush the NOCH Grass Glue, item no. 61130 or the NOCH Grass Glue XL, item no. 61131 to the selected area that you want to grass.
Fill the white container of the Gras-Master 2/3 full with the NOCH Grass. Use the fine sieve for the NOCH Static Grass Fibres of 1,5
mm length and the NOCH snowflakes. The medium-sized sieve is ideal for the application of the NOCH grass fibres with a length of 2.5
to 6 mm (Wild Grass, Field Grass, the Master Grass Blends and the Scatter Grass) and the coarse sieve is ideal for the application of
Wild Grass XL with 12 mm length. These are recommendations and may be adjusted by yourself according to your requirements.
Attach the alligator clip to the landscape in the area you are going to grass. This will polarize the device. If you are unable to attach the
clip, then we recommend sticking a small nail into the surface area and proceed to attach the clip. Switch on the Gras-Master and
gently shake the device over the area covered with glue. Allow the glue to dry and brush off or vacuum the loose grass. You may use
the loose grass again. When you complete your task, always switch the Gras-Master off.
Nozzle:
The NOCH Nozzle (item no. 60132 – not included in this package) can be used to flock small areas. The nozzle is also ideal for
flocking areas that are difficult to reach. Two sieves are included with the nozzle. Use the sieve with many holes (2) for the long grass
fibres and the sieve with few holes (1) for the short grass fibres. Put the sieve on the nozzle (number on the top) and screw the nozzle
on the Gras-Master. Fill the container only 1/3 full when using the nozzle.
Contents:
Gras-Master 2.0 with counter-pole and alligator clip with cable, 3 sieves (fine, medium-sized and coarse), 9 Volt Alkaline battery (pre-
installed) and 1 x bag of NOCH Static Grass “Summer Meadow” item no. 08310.
Function:
The electrical circuit within the Gras-Master 2.0 converts the 9V battery current into a stable high voltage reaching 20,000 V DC.
The coating at the bottom of the white container is a special material that creates a negative pole carried by the grass fibres. The
positive pole travels through the cable from the top of the device and releases through the alligator clip.
As the fibres exit the sieve they are pulled mid-air through an electrical field allowing the grass to land in a vertical position on the
surface area.
To achieve an effective electrical field you should use glue that conducts electricity. The NOCH Grass Glue (no. 61130) is capable of
performing this task.
Safety Instructions:
The Gras-Master 2.0 is designed modern safety systems, however, follow these precautions. Keep this item away from children.
Never physically touch or place a foreign object inside the white container when the device is ON or in operation. The
formation of sparks is possible during operation. Keep away the Gras-Master 2.0 from flammable liquids, gas or any combustible
materials during operations and storage. Make sure the item is stored in a dry area and protect it from humidity, moisture and wetness.
Never use or turn on the device, if you notice moisture or wetness in or on the Gras-Master.
Remove the battery if you place the Gras-Master 2.0 in storage. Do not throw your used batteries with your household waste. Dispose
them according to your local environmental rules. Check your local government waste regulations, if you are not aware of the
environmental rules in your area. Electrical and electronic devices do not belong in the trash!
Cleaning Tips:
Make sure the Gras-Master 2.0 is turned off and battery is removed. Never change or stress the black conductive material in the white
grass holder. Do not use solvents, liquid cleaners or water to clean your Gras-Master 2.0 or its parts! Simply use a dry towel.
Technical Data:
Input: 9V
Max. Operational Ampere: 20mA
Output: 20 kV DC
Maximum Current: 1,5mA
Power Supply: 9V Alkaline Battery
Battery Life Expectancy: max. 60 hours
In use operation indicated by illuminated red LED
On/Off Switch
Keep these instructions for reference purposes
