Nobles Tidy-Vac 6 (09-2012)
5
English
EN
Preparing Machine for Operation:
1.
Lift up the latch on the front of the lid and lift the lid (Fig.1 & 2) to ensure that the dust bag is installed.
To install the dust bag, slide bag opening over the air entrance connector (Fig.3). Make sure the arrow is pointing upward
(Fig.4).
NOTE: The seal around the dust bag opening should cover the air entrance connector inside the housing.
Lock the lid down with the latch (Fig. 5)
2.
Insert the vacuum hose into the base of the machine by turning the hose clockwise until it is secure (Fig. 6).
3.
Attach the telescopic wand onto the vacuum hose (Fig. 1) and attach the desired cleaning tool (Fig. 2)
4.
To extend the telescopic wand push the button downwards while extending the lower part of the wand (Fig. 3).
NOTE:
If there is too much suction when using a cleaning tool release some suction by pushing the button up on the hose
handle (Fig.4).
3
2
1
6
5
4
3
1
1
3
2
4
