Nobles SPEED SCRUB, Руководство оператора

Страница: 8 / 69

EN
OPERATION
Nobles Speed Scrub (03--08)
8
MACHINE OPERATION
FOR SAFETY : Do not operate machine unless
operator manual is read and understood.
PRE--OPERATION
1. Inspect power cord for damage.
2. Sweep and dust-mop the floor.
3. Check that the brush and squeegee blades are
installed.
SCRUBBING FLOORS
WARNING: Fire or Explosion Hazard, Do Not
Use or Pick Up Flammable Materials.
1. Pull the handle adjustment lever and adjust the
handle to a comfortable operating height (Figure
11). Release the lever to lock the position.
FIG. 11
2. Lower the scrub head to the floor by stepping on
the transport release pedal (Figure 12).
FIG. 12
3. Press the main power switch to the on ( I ) position
(Figure 13).
4. Press the scrubbing mode switch towards the
vacuum/brush/solution mode (Figure 14).
FIG. 13 FIG. 14
5. To begin scrubbing, pull the start triggers and push
or pull the machine in either direction (Figure 15).
FOR SAFETY: When operating machine, do not run
machine over power cord.
FIG. 15
6. When stopping, release the triggers and continue
to move the machine to pick up all solution.