OPERATION
Speed Scrub
t
2701/3301 (06–01)
14
TRANSPORTING MACHINE
When transporting machine by use of trailer or truck,
be certain to follow tie–down procedures below:
FOR SAFETY: When using machine, go slow on
inclines and slippery surfaces.
1.
Remove squeegee from machine and raise brush
head. Leave pad or brush installed.
2.
Load machine using a recommended loading
ramp.
3.
Position front of machine up against front of trailer
of truck. Once machine is positioned, lower brush
head.
4.
Place a block behind the drive wheel and the rear
casters.
5.
Place tie–down straps over top of machine and
secure straps to floor. It may be necessary to
install tie–down brackets to the floor of your trailer
or truck.
STORING MACHINE
1.
Before storing machine, be certain to flush tanks
and drain machine of all water.
2.
Store machine in a dry area with squeegee
removed and pad driver in the raised position.
3.
Remove recovery lid to promote air circulation.
4.
When storing machine for short periods, raise pad
driver and squeegee off floor to prevent damage.
ATTENTION: If storing machine in freezing
temperatures, be certain to drain machine of all
water. Damage due to freezing temperatures is not
covered by warranty.
RECOMMENDED STOCK ITEMS
Refer to the Parts List section for recommended stock
items. Stock Items are clearly identified with a bullet
preceding the parts description. See example below:
Содержание Speed Scrub 2701
Страница 18: ...OPERATION Speed Scrubt 2701 3301 10 00 18...
