Page 6
NOBLEREX K2 MANUAL
AESTHETICMD
Page 11
The default operation mode is
auto mode-1
or beginner
mode, the NobleRexK1 ‘beeps’ once when this is
selected. If you choose to select a different mode you
may do so at this point. To select
auto mode- 2
or
auto
mode- 3
, press the corresponding auto mode button on
the remote control or operation board display.
Auto
mode- 2
or intermediate mode ‘beeps’ twice when it is
selected
and
Auto mode- 3
advanced mode ‘beeps’
three times when it is selected.
You may exit auto mode at any time by pushing the
manual button on the remote control or operation board.
If done correctly, you will hear a ‘beep’ and the
NobleRexK1 will continue to operate at an intensity level
(speed) of 1.
You may raise the speed level, and increase intensity by
pushing the ‘up’ button on the remote control or
operation board. Each time the button is pushed, the
NobleRexK1 will ‘beep’ and a green LED located on the
left side of the operation board will illuminate, displaying
the increase up to 10.
A ‘Beep’ will be heard when pressing the ‘time’ button on
the remote control or operation board and each LED
means one minute of time during an exercise program.
When the ‘time’ button on the right is pushed, the LED
increases by 1, each push, and the operation time is
extended by one minute, each push. Conversely, when
the ‘time’ button on the left is pushed, the LED
decreases by 1, each push, and the operation time is
decreased by one minute, each push.
(1)
This switch converts the NobleRexK1 into ‘manual’ mode while the machine is
operating in ‘auto’ mode.
(2)
The speed indicator green LED, displays the current speed and vibration intensity
of the program. Speed is measured from left to right on a scale of 1 to 10, 1 being
the slowest (least intense), 10 being the fastest (most intense).
(3,4)
Two buttons control the speed and vibration intensity of the NobleRexK1. Each
time the button with the arrow pointing up is pressed, the speed will increase by
one. Concurrently, each time the arrow pointing down is pressed the speed will
decrease by one.
(5,6)
The power button and remote control receiver are located here. The power can be
supplied with one press of this button, and shut off with another press. The remote
control receiver is located directly above the power button. The remote control
uses infrared technology so it is important not to cover or obstruct the receiver
area while using the NobleRexK1.
(7)
The time indicator red LED, displays the operating time of the current program
selected. Time is measured from left to right with each LED light representing one
minute. The machine is designed to operate on 10 minute cycles however, time
can be manually modified by using the NobleRexK1 remote control. The LED
lights will turn off one by one as each minute passes during operation.
(8)
This switch converts the NobleRexK1 into ‘auto’ mode while the machine is
operating in ‘manual’ mode.
Содержание k2 mh-7500
Страница 1: ...Model No MH 7500 PRODUCT INSTRUCTION MANUAL...
Страница 9: ...AESTHETICMD Page 9...
