20
Electrical system
15 Inspect the electric wiring for damage
16 Check the electric connections and terminals
17 Test the Emergency switch function
18 Check the electric drive motor for noise and damages
19 Test the display
20 Check, if correct fuses are used
21 Test the warning signal
22 Check the contactor(s)
23 Check the frame leakage (insulation test)
24 Check function and mechanical wear of the accelerator
25 Check the electrical system of the drive motor
Braking system
26 Check brake performance, if necessary, replace the brake disc
Battery
27 Check the battery voltage
28 Clean the terminals for corrosion and damages
29 Check the battery housing for damages
Charger
30 Check the main power cable for damages
31 Check the start-up protection during charging
Function
32 Check the horn function
33 Check the air gap of the electromagnetic brake
34 Test the emergency braking
35 Test the reverse and regenerative braking
36 Test the safety (belly) button function
37 Check the steering function
38 Check the lifting and lowering function
39 Check the tiller arm switch function
General
40 Check if all decals are legible and complete
41 Inspect the castors, adjust the height or replace if worn out.
42 Carry out a test run
