18
Before using the charger, please fully understand the instructions of the charger
instructions.
Always follow these instructions
The room, where you are charging must be ventilated.
The exactly charge status can be only checked from the discharge indicator. To
control the status, the charging must be interrupted and the truck must be started.
Do not make attempts to charge the battery if it is impacted and the battery case is
damaged.
It’s also allowed to remove the battery out and charge in dedicated area.
If there is an optional second battery, the truck can continue to work after replacing the battery, and
charge the battery that needs to be charged separately.
Table 4: LED-Status
Table 5: Charger (PTE15Q)
LED - Signal
Function
Red
Charging
Green
Fully charged
Model
Specification
Input
Output
DZL2420SS02
24V8A
（
EN
）
180Vac -240Vac
～
2.0A MAX
29.2V 5.0A
DZL300SS02
24V8A (EN)
180Vac -240Vac
～
3.0A MAX
29.2V 8.0A
SSLC300V29
24V8A (USA)
120Vac
～
3.0A MAX
29.2V 8.0A
Fig.12: Battery charging
Park the truck at a dedicated secured
area with a dedicated power supply.
Lower the forks and remove the load;
To keep the vehicle power green on,
connect the charger charging plug (19)
to the battery charging port (20), and
then connect the charger power plug
(18) to the power socket.
The charger
starts charging the battery.
If charging is completed, disconnect the
charger from the battery and the power
supply, then put the charger in the
designated pocket.
