11
3. WARNINGS, RESIDUAL RISK AND SAFETY INSTRUCTIONS
DO NOT
•
Lift the load higher than the lift point when operating the stacker outdoors.
•
Put feet or hands under or inside the lifting mechanical structure.
•
Allow other person than the operator to stand in front of or behind the stacker when it is moving
or lifting/ lowering.
•
Overload the stacker.
•
Put feet in front of the wheels, otherwise you may get injured.
•
Lift people. People could fall down and suffer severe injury.
•
Push or pull the loads.
•
Operate the stacker on ramps.
•
Use a truck without a protective mesh (Fig 1, item 15-protective mesh).
•
Load the goods on sides or tines. Load must be distributed evenly on the forks.
•
Load the stacker with unstable or unbalanced goods.
•
Operate truck without manufacturer’s written consent.
•
Supply the truck with AC voltage other than 110V or 220V required by the charger.
Watch difference in floor levels when driving. Load could fall down or the truck could lose control. Keep
watching the condition of load. Stop operating the truck if load becomes unstable. Brake the truck and
activate the emergency button (6) by pushing when sliding load on or off the truck. If the truck has any
malfunctions, follow chapter 6.
Practice maintenance work according to regular inspection. This truck is not designed to be water
resistant. Use the truck under dry condition. Prolonged continuous operation might cause damage of the
power pack. Stop operation if temperature of hydraulic oil is too high.
•
When operating the electric pallet stacker, the operator has to wear safety shoes.
•
The truck should be used indoors with ambient temperatures b5
℃
and + 40
℃
.
•
The minimum operating lighting must be more than 50 Lux.
•
Use the truck on ramps.
•
To prevent unintended sudden movements when not operating the truck (i.e. from another
person, etc.), turn off the power for non operation.
•
Lift loads may influence the operation view, take safety actions or with the help of auxiliary
means to keep good view for the operator.
•
Avoid collision between the folding pedal and other articles, especially the collision and shearing
when traveling forwards. Keep safe operating speed at all times based on the environment.