Noble Digital Wedge Lock
ETZ08T
Noble Security Inc.
Single User manuals Ver. 0.94 Dec., 2015
NOTE: Do not connect the lock to the computer via USB until instructed to do so.
SOFTWARE INSTALLATION
•
Go to
www.noblelocks-reg.com
•
Open download.
•
Select
lock user ,
Download and install
LaptopLockerUser.msi
•
Run SW from the
Start Menu
(After the first running, Laptop Locker runs in the background until a lock is
connected).
LOCK REGISTRATION
NOTE: Must be connected to the internet to register the lock, and to change the user password.
•
Connect the lock by the USB cable from the PC/Laptop USB port to the Micro USB port in the lock.
•
Lock should blink green when connected for the first time. (If the lock blinks fast red, it’s a registered
lock.)
•
User Interface will open (Figure 1)
.
Figure 1: Main screen when the lock is connected
•
Press the
Register
key on the upper right side
•
The Registration screen will open. (Figure 2)
