Noaw A350G/L, Инструкция по эксплуатации и техническому обслуживанию, Страница: 15 / 23

Use and maintenance
14
2. If the knife cover is tight, loosen it with pressure
on the tension rod knob.
Take out the tension rod and remove the knife
cover using the special knob.
Disassembling the slice deflector
1. Rotate and lift the slice deflector as in the figure,
it’s not necessary to remove it, but it is possible to
extract it pulling the slice deflector to yourself;
6.2.3 Cleaning the machine and the parts that
have been removed
PRODUCT TO BE USED
Only use hot water and a biodegradable detergent
for dishes with a 7-8 PH, at a temperature of no
lower than 30°C using a soft, spongy cloth and a
semi-rigid nylon brush for the plate and the sharp
food press.
WARNING:
For cleaning the sharp areas of the
plates, the food press and the knife, we
recommend using protective gloves.
Rinse well with a lot of hot clean water and dry with
a soft cloth or a spongy material.
Do not clean the slicer with water or stream jets or
similar methods.
Cleaning the knife
WARNING: Use protective gloves and
concentrate on the job at hand.
DANGER!
1. Press a damp cloth on the surface of the knife
and move it slowly from the centre to the edge, as
shown in the picture, on the side of the knife cover
and on the other side;