
13
NUTV5-S QUAD
Four N5 speakers, NSUB, HS4 amplifier and Bluetooth remote
Installation Procedure/Connections
If you feel unsure about installing this system yourself,
we strongly advise to have it installed by a
qualified technician.
Before installation
, Disconnect the NEGATIVE battery post connection and secure the
disconnected cable to prevent accidental reconnection during installation.
This is an essential
safety precaution during installation
!
Avoid running power wires near the low-level input cables, antenna, power leads, sensitive equipment or
harnesses. The power wires carry substantial current and could introduce unwanted noise into the audio
system.
1.
Connecting your amplifier to a power source:
A.
This amplifier requires a quite a lot of power therefore it should be connected
straight to the battery. Do not be tempted to connect it to your bus bar if you have
one.
B.
Connect the RED power cable to the positive (+12V) battery post.
C.
Connect the Black/Ground power cable to the negative (-12V) battery post.
D.
2.
Connecting your amplifier to your head unit
A.
Please refer to the user manual included in your head unit box.
3.
Connecting your speakers to the amplifier
:
A.
Connecting your four N5 speakers:
Inside your package you will find 4 Y splitters: 2 Black and 2 Red.
All 4 Y splitters will be connected to the 2 Front channel Terminals.
The
2 Black
Y splitters will be connected to the
2 Negative
Front terminals:
Front Left
–
(white & black)
Front Right
–
(grey & black)
The
2 Red
Y splitters will be connected to the
2 Positive
Front terminals:
Front Left + (white)