WIR BLASEN AUF. SIE FALLEN AUF.
www.noproblaim.at
INFLATION
INFLATION
1. Clean an area, where the tent should be placed. Mainly sharp objects and chemicals have to be removed. Use of protec
ধ
on
blanket is recommended.
2. Remove tent from the bag, place it to its future posi
ধ
on.
3. Check posi
ধ
on and func
ধ
on of all four valves. Due to an order of one way central in
a
ধ
on system, the
black in
a
ধ
on valve
must be installed on posi
ধ
on signed with
black arrow
. A base part of black valve must be properly
ধ
ghted (check a valve seal
before use), small black cap must stay open.
Red overpressure valves
must be installed on other 3 posi
ধ
ons, well
ধ
ghted to
prevent air leak. In a case tent was not used for longer
ধ
me period, it is recommended to check func
ধ
oning of all overpressure
valves by pushing the spring with a
nger or blowing through the valve.Paralelly, seats of all valves shall be checked to avoid
sand grains or dirt to block closing the valve.
red overpressure valves
black in
a
ধ
on valve
black arrow posi
ধ
on
4. Check correct placement of small roof over the central assembly
5. Connect a hose of pump to the black valve and start in
a
ধ
on.
6. By the gradual ac
ধ
on of springs in central in
a
ধ
on system, legs of AXION tent are in
ated gradually.The
rst in
ated leg is
one with installed black (in
a
ধ
on) valve.In the second phase le
đ
and right leg are in
ated.In the third phase a tranverse leg is
in
ated. In this step it is important to „help“ a leg to erect (see picture).
