8
6. Cable Connection
The NLT Lightning Bolt can be connected directly from a PoE Switch or a PoE
Extender. The Bolt is a PoE Active device and need a compatible power source.
The maximum distance on a single run of Cat6 is 100m from the source. NLT
recommend using cat6 AWG23 ethernet cable to minimize losses
7. Configuration
7.1. Connecting to Logging Page
The Lightning BOLT has a default IP address of 192.168.1.1 and a subnet mask
of 255.255.255.0
You must set your PC IP address to be on the same subnet as the Lighting BOLT
(that is, the PC and BOLT must both be on network 192.168.1.0/ 24). To access
the Lightning BOLT’s management GUI interface, follow these steps:
I.
Point the web browser to http://192.168.1.1
II.
Log into the interface by entering the default credentials
Username:
root
Password:
nltinc
III.
Click the "Login" button
After successfully logging into the Lightning Bolt the GUI will change to the start
page of the unit:
