nLight rES7, Руководство пользователя

Страница: 3 / 3

3 of 3
rES7 Sensor
Fixture Embedded Smart Sensor
360° COVERAGE
•
LOW VOLTAGE
•
WIRELESS
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com © 2021 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/29/2021
IS-RES7-002
WIRING
Compatible EldoLED Drivers:
1. Request the second LED output as an AUX in Titan
2. Request these AUX settings in Titan: VAUX = 16V and AUX “ON” during standby
3. Load on LED output 1 shall exceed 42V
NOTE
POWER [W] DRIVER PART # NOTE
20 SOLOdrive 260/U SL0260U2 1
30 ECOdrive 30B-M1M0Z EC30B-M1M0Z1 2
30 SOLOdrive 30B-M1M0Z SL30B-M1M0Z1 2
30 ECOdrive 368/L EC0368L3-NLIGHTAIR 3
30 SOLOdrive 368/L SL0368L3-NLIGHTAIR 3
30 ECOdrive 30S-M1M0Z EC30S-M1M0Z1 2
30 SOLOdrive 30S-M1M0Z SL30S-M1M0Z1 2
30 SOLOdrive 360/U SL0360U2 1
50 SOLOdrive 560/A SL0560A3 1
50 ECOdrive 568/L EC0568L4 2
50 SOLOdrive 568/L SL0568L4 2
50 ECOdrive 50L-M1M0Z EC50L-M1M0Z1 2
POWER [W] DRIVER PART # NOTE
50 SOLOdrive 50L-M1M0Z SL50L-M1M0Z1 2
50 SOLOdrive 560/S SL0560S4 1
50 SOLOdrive 560/U SL0560U3 1
75 SOLOdrive 75B-M2A0D SL75B-M2A0D1 1
75 ECOdrive 768/LHC EC0768L2 2
75 SOLOdrive 768/LHC SL0768L2 2
75 ECOdrive 75L-M1M0Z EC75L-M1M0Z1 2
75 SOLOdrive 75L-M1M0Z SL75L-M1M0Z1 2
100 ECOdrive 1065/M EC1065M2
100 ECOdrive 1068/M EC1068M2
100 ECOdrive 1065/S EC1065S2
100 ECOdrive 1068/S EC1068S2
LED Driver
LED Output
AUX
0-10V
+
+
+
}
Fixture embedded
nLight AIR Smart Sensor
(rES7)
*0-10V Dimming Common from luminaire may be pink or as
otherwise indicated per section 410.69 of the 2020 NEC
EldoLED
Driver
1
LED Output 1
LED Output 2
LEDcode NTC
+
+
+
}
Fixture embedded
nLight AIR Smart Sensor
(rES7)
EldoLED
Driver
1
LED Output 1
AUX
LEDcode NTC
+
+
+
}
Fixture embedded
nLight AIR Smart Sensor
(rES7)
Connect the violet (+) and gray/pink (-) 0-10V wires to the rES7 connectors marked Y (+) and Br (-), respectively
Connect the red/blue (+) and black (-) AUX wires to the rES7 connectors marked R/Bl (+) and B (-), respectively
PNK
*
GRY
PNK
*
GRY
BLU RED
Connect the yellow (+) and brown (-) LEDcode NTC wires to the rES7 connectors marked Y (+) and Br (-), respectively
Connect the red/blue (+) and black (-) LED Output 2 wires to the rES7 connectors marked R/Bl (+) and B (-), respectively
BLU RED
BLU RED
Connect the yellow (+) and brown (-) LEDcode NTC wires to the rES7 connectors marked Y (+) and Br (-), respectively
Connect the red/blue (+) and black (-) AUX wires to the rES7 connectors marked R/Bl (+) and B (-), respectively
BLU RED
BLU RED