NL Acoustics NL SONIC TESTER SC10, Руководство пользователя

Страница: 8 / 12

8
Using the Device for Checking
the NL Camera Accuracy
NL SONIC TESTER AND NL CAMERA ACCURACY CHECK PROCEDURE
1 . Power on the NL Camera.
2. Click on the cogwheel icon on the bottom left corner of the screen.
3 . Select Advanced settings
4. Tap on the More … button until you can see a Calibration Mode selection available. You may need to tap on
it once, twice or more, depending on your specific camera configuration. If you accidentally miss the page
containing the selection, keep tapping until it appears again.
5. Power on the NL Sonic Tester
6. Mount the device on a tripod. Place the device at least 1.0 meter from any surface. If you are using the
tripod provided with the NL Sonic Tester (or similar low tripod), place it on a table.
7. Select the CALIBRATION mode on the NL Sonic Tester by turning the switch according to the label on the
front side of the device.
8. Tap on the Activate button on the NL Camera screen to activate the calibration mode.