7
Getting Started
Accessories needed to get started:
•
The
NL Sonic Tester SC10
•
The
NL Camera battery charger
(power supply)
•
A
tripod
with quick release mount
TRIPOD
Any tripod that fits the quick release mount (
4
) can be used. If the tripod provided with the device is used, see
the tripod instruction manual.
STARTUP
Before startup, make sure the device’s switch (
3
) is in the
off
position. The leftmost position is the off
position (see the sticker on the front side of the device). Connect the mains cable of the power supply into a
wall socket before connecting the DC barrel connector to the power socket (
6
) of the device. After connecting
the DC barrel connector, the device will take about 10 seconds to start.
!! NOTE: If the mains cable is plugged into a wall socket AFTER the DC barrel connector is plugged in, the
device will not start up.
SHUTDOWN
Turn the switch (
3
) to the off position. Remove the DC barrel connector from the power socket (6) and the
device will shut down. Remove the mains cable from the wall socket.
OPERATING MODES
The switch (
3
) is used to select the operating mode. Operating modes are selected by turning the switch
(
3
) clockwise from the off position. All available operating modes are listed on the front side of the device.
Содержание NL SONIC TESTER SC10
Страница 1: ...SONICTESTERSC10 User Manual...
Страница 10: ......
Страница 11: ......
Страница 12: ......
