20
Adjusting work piece holder cylinders
To ensure correct functioning of the machine, the work piece holder cylinders must slightly
push on the work piece. Carry out their adjustment as follows:
-
Turn the hand wheel in the upper part of the work piece holder (position F, Fig. 5.3.2)
to adjust the holder cylinder height. Adjust the setting of the machine, so cylinders can
press on the work piece lightly, check if their position is correct – adjust the bevel
height (dimension A, Fig. 5.3.1.0) on the relevant scale A (position E, Fig. 5.3.2.)
Indicator is the top of the cylinder bar.
-
To ensure correct operation of the machine, it is important to check whether the
settings are correct. None of the illustrated situations (Fig.5.3.3.) can occur: the
position of the work piece machined in relation to the lower and holder cylinders must
be as illustrated in situations 1 and 4 in (Fig. 5.3.3.)
Fig. 5.3.2