Hub’O: Getting started
All Rights Reserved – nke Watteco®
Hub’O: Description of the exchanges with the Server
Page
6
of
14
2
H
ARDWARE
S
ET
-U
P
When the LoRaWAN gateway is shipped, a power supply cable is mounted. However, the LoRaWAN
antenna is not, in order to not be damaged during the journey.
Thus, the first thing to do is to mount the LoRaWAN antenna on the SMA connector (located at the
Hub’O right side). Once the antenna correctly mounted, it can be feld to the top to get what can be
seen on Figure 1.
When shipped, Hub’O already contains a 9V disposable battery. This battery is used to correctly
shutdown the gateway in case of pwer cut.
To open casing, it is recommended to use a flathead screwdriver to “do lever” on one of the red
squared area on Figure 2.
On the Figure 3 can be seen the space provided for the 9V disposable battery, please be careful to
respect the polarity.
SMA connector
LoRaWAN Antenna
FIGURE 2 - LORAWAN GATEWAY AT RECEPTION
Содержание Hub'O
Страница 1: ...HUB O GETTING STARTED ...