- 27 -
Gyropilot Graphic user guide
– 33-60-025-003 rev3
You can reset these channels using the following procedure:
Using the
Page
key,
select the
Main menu
page,
then using the browser
1
1
, select
Configuration
then
calibration
,
press the
Ent
key,
in the list of channels, select
average speed
, then press the
Ent
key,
select
yes
to reset the channel, or exit by pressing the
Page
key.
2.3 Configuring the display of the channels
The display Windows of the
Gyropilot Graphic
are independent. Configure the channels
according to your requirements:
Example, you want to replace the channel
boat speed
by the channel
depth
:
You have the option to backup nine setup configurations of the pilot,
press the
Ent
key to validate your selection.
2.4 Display configurations backup and restore
You have the option to backup nine setup display configurations.
To save a configuration:
in the
Screen page menu
,
select
Save configuration
and press the
Ent
key,
select the number of the configuration you wish to save.
using the browser
1
1
and the screen keyboard, enter the name of your configuration.
(Each letter that is part of the name must be validated by pressing the
Ent
key).
validate the name you have entered by pressing the
key
.
To restore a configuration:
in the
Screen page menu
,
select
Load configuration
menu, and press the
Ent
key,
select the number of the configuration you wish to display.
Useful tip
:
-
In the
Multifunction page,
press the
Page
until the display is in
“
Pages Stored
”,
-
Using the the browser keys
and
, select the configuration you need.
boat speed knots
20.50
tr wind ang degrees
70°
depth meters
10.20
tr wind ang degrees
70°
