- 26 -
Gyropilot Graphic user guide
– 33-60-025-003 rev3
2.2 List of channels created
The master display, whether it is the
Gyropilot Graphic
or
any other
TOPLINE
display
,
and
each
TOPLINE
sensor, automatically create their respective channels when they are connected
to the
TOPLINE bus
. Please refer to the user guides of the sensors and instruments to identify
their channels.
Channels created
by the
Gyropilot Graphic
when set as
master display
Channel designation
Magnetic heading
Apparent wind angle
Apparent wind speed
Depth
Surface speed
Maximum and average speed
Distance and heading to man over
board
Configuration
Bus voltage
VMG
CMG
True wind speed
True wind angle
True wind direction
Corrected heading
Estimated distance
Estimated angle
Trip log
Total log
NMEA
Performance
channels displayed
Target speed
Heading on other side
Optimum wind angle
Optimum VMG angle
Optimum CMG angle
Efficiency at close-haul
Polar efficiency
NMEA channels
displayed
COG and SOG
Cross-track error
Please note that the
MAX SPD
and
AVRG SPD
channels are displayed alternatively on one
single screen. By default, these two channels are calculated using the surface speed, and in the
absence of the latter they will be calculated using the SOG. These values, average and
maximum, are calculated from the time your installation is powered up.
